Volcano Control
Imported new generation volcano controller. 1.the class is in the form of 10 l and 12 li sets. 1 transmitter consists of 10 or 12 receiving units. The receiving units are powered by 1 9v battery. The waiting time is longer than 12 sats. with a shooting distance of 100 meters, it is not affected by interference. It works with optional new or old generation transmitter control. 1.the class is the fireworks controller.
RelatedProducts
Fog and Bubble Machine
The machine is powerful enough to fill with a layer of heavy fog in a short time, even at large large-area demonstrations. The machine is powerful enough to fill with a layer of heavy fog in a short time, even at large large-area demonstrations. The machine is powerful enough to fill with a layer of heavy fog in a short time, even at large large-area demonstrations.
Liquid CO2 is supplied from a low pressure tank (20 – 24 Bar) connected to the machine by a hose. Intelligent technology ensures that the fogging process does not start before the cooling chamber reaches the correct temperature.
Intelligent technology ensures that the fogging process does not start before the cooling chamber reaches the correct temperature. As a result, no “warm” fog that will rise can escape the machine. CRYO-FOG is compact size, light weight, powerful output, low noise and easy to use.
DMX Control Desk
What is DMX?
It is a protocol that works with RS485 interface. DMX data Normal value is at TTL level. It is one of the transport methods used to minimize data corruption when it will be sent over a long distance.
DMX data flow is usually unidirectional. It has a rate of 250,000Baud. It is in asynchronous serial format. The data format structure is given very clearly in the links above. DMX data transmission form is mostly used to control sound-light systems. A data (8 bits) that can vary between 0-255 can be sent within each address. Receiver Receiver devices follow the dmx data rate, and look at the data in its content when it comes to its own. . It does whatever it needs to do with that data.
Confetti Machine
The CO2 Confetti Machines (Super Blaster) is a powerful CO2 confetti machine ideal for large-scale events in arenas, stadiums and festivals.
Technical specifications:
Size: 66 x 38 x 135cm
Weight: 56kg
Power: CO2 Gas
Control: Manual or DMX
Control: Manual or DMX
Max. Launch Distance: 25m
Capacity: 10-15kg confetti paper
They are compact systems for firing Electric Confetti and Streamer Papers. The Powershot can be placed on stages or mounted on truss beams using a base plate. It can be controlled with DMX.
Technical specifications:
Producer:
Weight: 56kg
Power: CO2 Gas
Control: Manual or DMX
Control: Manual or DMX
Max. Launch Distance: 25m
Capacity: 10-15kg confetti paper
Specification
Manufacturer: MagicFX
Dimensions (LxWxH): 13x12x16 cm
Weight (KG): 1.95
Voltage: 230V
Power: 100 W
Control: 230V on/off or DMX by using a Switch Pack
Consumption: Electric cannons
Spark Machine
Spark Machine
It is an alternative Volkan machine that can work with DMX or an external control system.
Technical specifications:
Manufacturer: SHOWEN
Dimension: 155 x 38 x 135mm
Weight: 8 kg
Power: 220V AC 180W
Control: DMX, Remote control
Requirement: Special powder liquid
Max. Requirement: Special powder liquid
Run time: 30 minutes with 200 g fuel
Synchronized Fireworks Show System
Pyrodiy Ignition system is the world’s most powerful, fastest and safest Synchronized Fireworks Control System working with Canbus communication system.
Pyrodigy SLR3+ Specifications:
- Pyrodigy SLR3+ Specifications:
- Communication : Canbus / Adjustable R.F Band (2.4Ghz,433Mhz,868Mhz)
- Output: 48 controllable firing channels
- Output Voltage: 24 V 65 A, 17 Ah
- Connection: Radio (4 Pin) / Canbus (2 Pin) / DMX (3 Pin)
- Controllable Module: 200 Modules
- Security : Canbus 32 bit CRC / RF 128 bit AES
- Maximum Ignition Per Second: 250 ignitions/second
- RF Distance: indoor 300m / open area 64km Antenna to antenna
- Ignition interval : 4 ms
- Operating Temperature: -40 °C to 125 °C
- Test : < 0.8 mA
